Saros Sound Bar 200

Overview

The Saros® SB-200-P is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display.

Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver.[1] The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes.

The SAROS SB-200-P sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.

Key Features

• High-quality, full-range amplified stereo sound bar
• Delivers enhanced sound quality and performance for use with any flat panel display
• Mounts to a wall or sits on a shelf
• Balanced or unbalanced stereo line-level audio input [1]
• Unbalanced stereo audio cable included
• Powers on and off automatically
• 100 to 240 Volt AC powered

Features & Performance

Woofer

• 3 inch (76 mm) polypropylene cone w/rubber surround

Tweeter

• 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone w/rubber surround

Crossover Frequency

• 1 inch (25 mm) polyester dome

Impedance

• 20 Watts per channel, stereo

Transformer Taps

• 100 Hz to 20 kHz (±3 dB)

Frequency Response

• 83 dB SPL @ 1 meter, both channels driven @ 1 Watt each

Input Sensitivity

• 0.75 Vrms per channel for full rated output

Go To Sleep Time

• 20 minutes (±5 minutes) with no signal present

Wake Threshold

• 5 mV (±2 mV) typicalrn